Chapter 6. Configuring Your Controller
78 3ware SATA+SAS RAID Controller Card Software User Guide, Version 10.2
To change the phy link speed in 3BM
1 On the main 3BM screen,
Tab to Settings and press Enter.
2 On the pop-up menu, select
Phy Policies and press Enter.
3 On the Controller Phy Policies page, use the arrow keys to select the Phy
for which you want to set the link speed.
4 Press
Enter to display a popup of the possible settings, select the one you
want, and press
Enter again.
Figure 38. Controller Phy Policies page
To Next Page
Loading...
Need help?
General
