LSIS SV008iC5-1F User Manual

7. Function List
7-1
7. Function List
* The number of page is for User’s manual uploaded at LSIS website. You can
download the User’s manual which is described detailed function of parameter
from website. (http://www.lsis.biz
)
7.1 Drive Group
LED
display
Parameter
name
Min/Max
range
Description
Factory
defaults
Adjustable
during run
Page
0.0
[Frequency
command]
0/400
[Hz]
 This parameter sets the
frequency that the inverter is
commanded to output.
 During Stop: Frequency
Command
 During Run: Output
Frequency
 During Multi-step
operation: Multi-step
frequency 0.
 It cannot be set greater
than F21- [Max frequency].
0.0 O
ACC [Accel
time]
0/6000
[sec]
 During Multi-Accel / Decel
operation, this parameter
serves as Accel / Decel time
0.
5.0 O
dEC [Decel
time]
10.0 O
Drv [Drive
mode]
(Run/Stop
mode)
0/3
0
Run/Stop via Run/Stop key
on the keypad
1 X
1
Run/Stop
via
control
terminal
FX : Motor
forward run
RX : Motor
reverse run
2
FX : Run/Stop
enable
RX : Reverse
rotation select
3
Operation via
Communication Option
Frq [Frequency
mode]
0/8
0
Digital Setting via
Keypad 1
0 X
1
Setting via
Keypad 2
2
Analog Setting via
potentiometer
on the
keypad(V0)
3
Setting via V1
terminal
4
Setting via I
terminal

LSIS SV008iC5-1F Specifications

General

Brand	LSIS
Model	SV008iC5-1F
Category	DC Drives
Language	English