Faults
MXD70 Auxiliary mA Input
Setup and Operating Guide
- 41 -
Faults
Digital Input Errors
E301 DIG 1 Store A Checksum Error
E306 DIG 2
The Store A Save for the channel associated with this digital input has become
corrupted. Check the digital input's settings in the digital input menu and then
save the settings again in the Channel's Store A in the Save/Restore menu.
E311 DIG 3
E316 DIG 4
E321 DIG 5
E326 DIG 6
E331 DIG 7
E336 DIG 8
E302 DIG 1 Store B Checksum Error
E307 DIG 2
The Store B Save for the channel associated with this digital input has become
corrupted. Check the digital input's settings in the digital input menu and then
save the settings again in the Channel's Store B in the Save/Restore menu.
E312 DIG 3
E317 DIG 4
E322 DIG 5
E327 DIG 6
E332 DIG 7
E337 DIG 8
E303 DIG 1 Setup Checksum Error
E308 DIG 2
The Setup for this Digital Input has become corrupted. Check and correct the
digital inputs settings and turn the unit off and on again. If the message persists
please consult with your supplier.
E313 DIG 3
E318 DIG 4
E323 DIG 5
E328 DIG 6
E333 DIG 7
E338 DIG 8
E304 DIG 1 SD Card Checksum Error
E309 DIG 2
The SD Card store from which this Digital Input was restored from has become
corrupted. Check the Digital Input's settings in the digital input menu and then
save the settings again to the SD card store.
E314 DIG 3
E319 DIG 4
E324 DIG 5
E329 DIG 6
E334 DIG 7
E339 DIG 8
To Next Page
Loading...
Need help?
General
