Faults
- 42 -
MXD70 Auxiliary mA Input
Setup and Operating Guide
Faults
Communication Errors
E340 CH1 Comms Failure
E342 CH2
The Channel's Input Card is not responding. Try switching the unit off and then on
again. If the message persists, consult with your supplier, as the channel's input
card may require to be returned for repair.
E344 CH3
E341 CH1 Comms Error
E343 CH2
The Channel's Input Card is not Operating Correctly. Try switching the unit off and
then on again. If the message persists, consult with your supplier, as the channel's
input card may require to be returned for repair.
E345 CH3
E346 UNIT Output Comms Failure
The Basic Internal Outputs are not responding. Try switching the unit off and then
on again. If the message persists, consult with your supplier, as the unit may
require to be returned for repair.
E347 UNIT Output Comms Error
The Basic Internal Outputs are not Operating Correctly. Try switching the unit off
and then on again. If the message persists, consult with your supplier, as the unit
may require to be returned for repair.
E348 OP Output Option Comms Failure
The Output Option Card is not responding. Try switching the unit off and then on
again. If the message persists, consult with your supplier, as the Output Option
card may require to be returned for repair.
E349 OP Output Option Comms Error
The Output Option Card is not Operating Correctly. Try switching the unit off and
then on again. If the message persists, consult with your supplier, as the Output
Option Card may require to be returned for repair.
To Next Page
Loading...
Need help?
General
