LTS LTN8932-P16 - Configuring High-Speed Download

User Manual of Network Video Recorder
141
Figure 11. 28 External Port Settings Dialog Box
5. Click OK to save the setting for the current port and return to the upper-level menu.
6. Click Apply button to save the settings.
7. Enter the virtual server setting page of router; fill in the blank of Internal Source Port with the internal port
value, the blank of External Source Port with the external port value, and other required contents.
Each item should be corresponding with the device port, including server port, http port, RTSP port and https
port.
Figure 11. 29 Setting Virtual Server Item
The above virtual server setting interface is for reference only, it may be different due to different router
manufactures. Please contact the manufacture of router if you have any problems with setting virtual server.
11.2.10 Configuring High-speed Download
Purpose:
You can enable the High-speed Download function to widen the outgoing bandwidth of the device. In this way
you can speed up the download of record files through web browser or CMS software.
If you enable the high-speed download function, the outgoing bandwidth of the device will be increased by
40Mbps and the local menu operation will be affected. It is recommended to disable this function after finishing
the remote downloading of record files.
Steps:
1. Enter the Network Settings interface.
Menu >Configuration> Network
2. Select the More Settings tab to enter the More Settings interface..