LTS LTN8932-P16 - Configuring General System Settings

User Manual of Network Video Recorder
175
15.1 Configuring General Settings
Purpose:
You can configure the BNC output standard, VGA output resolution, mouse pointer speed through the Menu >
Configuration > General interface.
Steps:
1. Enter the General Settings interface.
Menu >Configuration> General
2. Select the General tab.
Figure 15. 1 General Settings Interface
3. Configure the following settings:
• Language: The default language used is English.
• Output Standard: Select the output standard to NTSC or PAL, which must be the same with the video
input standard.
• Resolution: You can configure the VGA resolution and HDMI resolution respectively. And up to 4K
(3840 × 2160) resolution is selectable for the HDMI output.
• Time Zone: Select the time zone.
• Date Format: Select the date format.
• System Date: Select the system date.
• System Time: Select the system time.
• Mouse Pointer Speed: Set the speed of mouse pointer; 4 levels are configurable.
• Enable Wizard: Enable/disable the Wizard when the device starts up.
• Enable Password: Enable/disable the use of the login password.
4. Click the Apply button to save the settings.
15.2 Configuring DST Settings
Steps:
1. Enter the General Settings interface.
Menu >Configuration>General
2. Choose DST Settings tab.