Installation
34
Paging System
Use the following procedure to connect and test a phone:
NOTE:
If you connect a paging system from a manufacturer other than Lucent
Technologies, a paging interface may be required.
1 Insert the modular plug into the
PAGE jack on the PARTNER ACS
processor module (located near the
middle of the processor, just above
the line jacks).
NOTE:
When connecting a paging unit to
the PARTNER ACS page jack, a
twisted pair cable must be used
between the paging unit and the
PARTNER ACS processor module.
2 Route the cord as you did for line and extension cords, then connect the other
end of the cord to the paging system.
Music-On-Hold Audio Source
The performance of music over telephone lines is a public performance under
United States Copyright law. Accordingly, in order for the performance of that
music to be lawful, it must be licensed annually to the user by the copyright
owners or their representatives.
You can purchase a Magic-On-Hold system from Lucent Technologies
(800-446-5366), which includes the required license for the first year. This license
must be renewed annually.
To Next Page
Loading...
