Need help?Do you have a question about the LUCEPLAN berenice and is the answer not in the manual?
General| Voltage | 220-240V |
|---|---|
| Frequency | 50/60 Hz |
| Designer | Paolo Rizzatto |
| Material | Aluminum |
| Light Source | LED |
| Color Temperature | 2700K |
| CRI | >80 |
| IP Rating | IP20 |
Detailed description of the articulated lamp, its materials, and features like adjustable hinges and reflector types.
Lists different model variants (D12 El, D12 El pi, D12 El pt, etc.) with their respective dimensions and configurations.
Details the base accessory (D12/1) used for table and floor models, including cable passage.
Describes the table pivot accessory (D12/75) for mounting on a tabletop, including installation instructions.
Explains the wall attachment accessory (D12/3) for mounting the lamp on a wall, with installation guidance.
Step-by-step instructions for inserting the lamp's pivot into the support and aligning the guide.
Instructions for connecting the lamp to the provided transformer via the connector.
Guide on how to insert the UV protection glass into the lamp holder, ensuring correct seating.
Procedure for installing the reflector into the lamp head, ensuring proper engagement.
Instructions for inserting the safety distance rod to prevent accidental contact with flammable surfaces.
Guidance on safely removing and replacing the reflector, emphasizing cooling.
Steps for replacing the halogen bulb and the protection glass, referencing previous procedures.
Instructions on how to orient the lamp head safely using the distance rod.
Procedure for adjusting the mechanical balance of the lamp arm using nylon nuts and a coin.
Notes on electrical contacts and the importance of proper tightening of nylon nuts for stable operation.
Advice on lubricating contact surfaces with special grease for optimal bulb efficiency.
Crucial safety information regarding installation, use, and manufacturer liability for misuse.
Guidelines for maintaining the appliance, replacing bulbs, and handling damaged cables.
Instructions for cleaning the lamp's body and shade using a soft, dry brush.
To Next Page
