Commissioning
24 Snow depth sensor SHM 31, V2.1
k) T
o check the sensor’s functionality, you can select all the channels that
ConfigTool.NET can read. These channels are displayed as soon as you click on
‘Load channel list’:
For an initial sensor check, we recommend selecting channels 500, 600, 650, 660,
700 and 800. You can change the channel selection again at any time. Click on
‘
Save device’ to return to the Workspace menu.
l) If necessary, ensure that you save your workspace.
Figure 27: The ‘Device Settings’ menu
To Next Page
Loading...
Need help?
General
