Need help?Do you have a question about the LulzBot Mini 2 and is the answer not in the manual?
General| Filament Diameter | 2.85 mm |
|---|---|
| Nozzle Diameter | 0.5 mm |
| Print Speed | Up to 275 mm/s |
| Connectivity | USB, SD Card |
| Software | Cura LulzBot Edition |
| Operating System Compatibility | Windows, macOS, Linux |
| Build Volume | 160 mm x 160 mm x 180 mm |
| Layer Resolution | 0.05 mm - 0.4 mm |
| Supported Materials | PLA, ABS, TPU, Nylon |
| Print Surface | Heated borosilicate glass/PEI |
| Bed Leveling | Automatic |
| Power Requirements | 100 - 240 VAC |
| Printer Dimensions | 340mm x 385mm |
To Next Page
