2.0 Player
/ Operations Manual
7
WEIVER 2.0 Player plays back the real world RF signals which had either recorded with WEIEVR - RF capture and
playback platform or other RF capture equipments. Also, it comes with a converting utility that converts the I/Q data
le into a possible data format, .wpj, with WEIVER 2.0 Player. It's all for to re-generate real world RF environments
that are too complex To exact simulate.
It records signals directly to external SSD, and plays back directly from external SSD, so you can carry the “hassle-free
heavy RF data copy“ on your own.
FEATURES
• Supports all universal DTV and ATV broadcasting include Broadcasting Radio protocols
• Playback of real world broadcasting signals recorded with WEIEVR R & P platform to regenerate real world
conditions that are too complex to simulate
• Front-access hot swappable SSD for fast reading and writing speed
• e-SATA interface for external storages
• Support for Real-time Spectrum and GPS location with Signal Tracer
WEIVER-RF capture and playback system can plays back RF signals covering the bandwidth range from 8M to 56M,
or ARB in almost any environment, such as in laboratories or during on-site testings. You can see the all information
about WEIVER-RF capture and playback equipment from LUMANTEK's web site ( http://www.lumantek.com/prod/
prod_detail.html?prod_num=A0001 ).
1.1 / WEIVER 2.0 Player System
1. INTRODUCTION
To Next Page
Loading...
