Need help?Do you have a question about the LumaSense technologies IN 5 plus Series and is the answer not in the manual?
General| Emissivity Setting | 0.10 to 1.00 adjustable |
|---|---|
| Sighting | Laser targeting |
| Analog Output | 0/4 to 20 mA |
| Digital Interface | RS232 or RS485 |
| Power Supply | 24 VDC ±20% |
| Operating Temperature | 0 to 60 °C (32 to 140 °F) |
| Storage Temperature | -20 to 70 °C |
| Relative Humidity | 10 to 95%, non-condensing |
Physical dimensions and outline drawing of the pyrometer.
Describes the intended applications and operational conditions for the pyrometer.
Essential safety precautions for all users of the pyrometer.
Specific safety instructions for laser targeting and electrical connections.
Instructions for PC connection and pyrometer connector pin assignment.
Adjusting emissivity for accurate temperature measurements.
Safety precautions to observe when performing maintenance.
To Next Page
