Lumens VC-TA50

English -17
1
st
Level
Major Items
2
nd
Level Minor Items
3
rd
Level Adjustment Values
Function Descriptions
PTZ Assist
On / Off
This function can only be enabled in the
Manual Focus (MF) mode
When PTZ Assist is enabled and PTZ
control is in operation, the focus will be
triggered. The focus will not be triggered
when the scene changes
SMART AF
On / Off
Turn on this function and AF will mainly
focus on the face
Ethernet
DHCP
On / Off
Enable/Disable the dynamic host
configuration
IP Address
192.168.100.150
Press [ENTER] to be in modify mode; select
the item to be modified using the up and
down keys, and modify the value using the
left and right keys or the numeric keys.
Subnet mask
255.255.255.0
Gateway
192.168.100.254
Audio
Audio In
Line In/ Mic In
Set Audio In
Audio Enable
On / Off
Turn on/off audio output
Audio Volume
0~C~10
Audio Volume Setting
Audio Delay
On / Off
When the audio is not synchronized with the
video, enable this function to set the audio
delay time
Audio Delay Time
(ms)
-1~-500ms
Set audio delay time
Encode Sample Rate
1. 48 KHz(AAC)
2. 44.1 KHz(AAC)
3. 16 KHz(AAC)
4. 16 KHz(G.711)
5. 8 KHz(G.711)
Set the encode type and sample rate
<Remark> SDI supports the audio output of
48 KHz only
System
Prompt
On / Off
Turn on/off the prompt information on the
display
IR Receive
On / Off
Turn on/off the infrared reception
When it is Off, the remote control will not be
able to control the camera. At this moment,
turn off and then turn on the power to restore
control of the remote control.
Motionless Preset
On / Off
When the function is enabled, the screen will
Freeze when Preset is executed. Freeze will
be released after Preset is completed
Tally Lamp
On / Off
Select Off and it will not be triggered by
commands to turn on or off
Language
English / Chinese
Initial Position
Last MEM / 1st Preset
Select the camera lens to return to the Last
MEM or the 1st Preset after POWER ON
<Remark> 1st Preset = Preset 0
Output Mode
1080p 60/59.94/50/30/29.97/25
1080i 60/59.94/50
720p 60/59.94/50
Choose the output resolution
Control Device
Encoder / Controller
Control Device setting,
Controller: for joystick
Encoder: for tracking system
Protocol
Protocol V/ Pelco D
Protocol V=VISCA