LUMINELL SL1 - Function Shortcut Management

7 OPERATION/USE
LUMINELL SWEDEN AB 40
Change the function shortcuts on the homescreen
The functions that can be selected for each button can be displayed by holding down that
function button for 6seconds, this does not apply if "Homescreen lock" is enabled see, 7.5.3
Homescreen lock to disable.
Navigate the functions list using the tilt joystick, for description see table below.
Confirm selected function with "OK" or exit the menu with "Back"
In our example, we select "Backlight Off" as a new function for button “F3”.
For Position Shortcuts A-D to work, these must first be programmed, see XXXX
Function already linked to that button is indicated by an arrow “>” in front of the text.
Button Function
Description
Goto park
Turn off the light and park in the preset position (store park position)
Start sweep
Starts sweep with preset sector size and speed (Modify sweep)
Position A
Go to preset position A with stored light settings (Position settings).
Position B
Go to preset position B with stored light settings (Position settings).
Position C
Go to preset position C with stored light settings (Position settings).
Position D
Go to preset position D with stored light settings (Position settings).
Backlight Off
Turns off the panel backlight, pressing any button turns the light back on
Switch system
Select and control other searchlights in the network
6s