7 OPERATION/USE
LUMINELL SWEDEN AB 47
Park all
As the command name indicates, all powered searchlights in the network will turn off the light
and go to the respective parking position. All connected panels will go into standby mode.
Start Sync
This function synchronizes movement and light control on multiple searchlights from one
operator panel.
This means that with a simple push of a button you can control several SL1s for maximum
light output in a master/slave network. The searchlight you are controlling when the sync is
activated is the master and other SL1 searchlights will be slaves and will imitate the
positioning and the light control on the master.
In the "NET" screen, the function is activated / deactivated.
For the sync function to be useful, the searchlights must be configured with the same origin
setting (0/0).
Note that the NET screen is locked as long as sync is activated, this to ensure that no
automatic function is started with this function on.
To Next Page
Loading...
