7 OPERATION/USE
LUMINELL SWEDEN AB 46
4. Net
The “Net” menu contains functions that are only relevant if two or more SL1s are connected
in the same network.
Switch system
The “Switch system” menu lists all powered SL1s that are found in the network, the
searchlight currently controlled is highlighted and has the symbol ">" in front of its name.
With the tilt joystick, step up and down in the list to mark the new searchlight to control from
the operator panel. Confirm the selection with "OK". Wheel indicator flashes twice.
The operator panel display now changes to the selected searchlights "Homescreen" and if
an auto function is activated, for example "sweep", this is also displayed. (if sweep shortcut
exists).
The factory-set name is always "SL1", so for easy navigation in this menu, all the
searchlights should have logical unique names. For example, STBD and PORT.
To change name, see 7.6.6 Name system
To Next Page
Loading...
