EasyManua.ls Logo

LUMINELL SL1 - Storing Park Position and Naming Systems

LUMINELL SL1
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7 OPERATION/USE
LUMINELL SWEDEN AB 53
Store park position
This menu enables the storing of a park position with lamp housing pointing at any direction
and tilt angle when the “Goto park” command is selected.
To select new follow the info on the display saying that the searchlight should be moved to
the new desired park position with wheel and joystick.
Confirm new position with "OK" or exit the menu with "Back".
Its recommended that the tilt position is pointing slightly down to drain off rain, snow etc.
Name system
The dedicated Luminell network can contain several searchlights and operator panels.
To make the network easy to navigate the corresponding searchlight can be named to a well-
known and logical identity for the operator.
The name is set by moving the joystick up and down to select correct character. To move to
next character in the name use the wheel.
Confirm new name with "OK" or exit the menu with "Back".
If more than one searchlight, it is advisable to name it after the position it has on the boat e.g.
starboard (stbd), port etc.

Related product manuals