10
Recalling Values from Memory
1. The Monitor has two Memory Zones (1 and 2). Each zone
can store up to 50 measurements.
2. To read memory values from a selected Memory Zone,
use the “User-Switching Key” to select a Memory Zone
(1 or 2) from which you want to recall values from. Then,
press the “M” key, and the values will be shown on the
LCD display with an assigned memory sequence number.
3. The monitor will display an average of the previous
measurements first. Every new press of the “M” key
calls for one set of prior values stored. Latest memory
will be recalled first. The calculated average will be
applied to a maximum of the last 3 memories.
To Next Page
Loading...
Need help?
General
