Time Adjustment
1. To adjust the date/ time in the monitor, press the key . The display will show a blinking
number showing the month.
2. Change the month by pressing the “ ” Key. Each press will increase the number by one
in a cycling manner. Press the Key. again to confirm the entry, and the screen will show a
blinking number representing the date.
3. Change the date, the hour, and the minute as described in Step 2 above, using the “ ” Key
to change and the Set Key to confirm the entries.
4. A “0” will reappear as the Blood Pressure Monitor is ready for measurement again.
12
Press the Set-key
blinking month
increasing month
confirm the entry
To Next Page
Loading...
