Lumiscope 1143 User Manual

Introduction
Congratulations on your purchase of the new Lumiscope
Model 1143. This automatic wrist blood pressure monitor is
both easy-to-use and ideally suited for daily measurements.
The large display includes systolic blood pressure reading,
diastolic blood pressure reading and the pulse rate, all
clearly shown at the completion of each reading.
You can store up to 85 measurements, ideal for users who
want to monitor and track their blood pressure on a regular
basis. The 1143 is compact and portable, making it perfect
for home use and travel.
Blood pressure measurements determined with your 1143
are equivalent to those obtained by a trained observer
using cuff/stethoscope auscultation method, within the limits
prescribed by the American National Standard, Electronic or
Automated Sphygmomanometers.
Please read this manual carefully before use. For specific
information on your own blood pressure, contact your
physician. Please be sure to keep this manual.
3
Model : 1143
Display System : Liquid Crystal Display
Power source : 2 "AAA" Alkaline batteries
Measurement Method : Oscillometric
Measurement Range : Pressure: 20~300 mmHg
Pulse: 40~200 beats/minute
Accuracy : Pressure: ±3 mmHg
Pulse: within ±5% of reading
Inflation : Electrical Rolling Pump
Pressure Exhaust : Solenoid Valve
Memory : 85 sets
Low Battery Indicator : Yes
Auto shut-off : 2.5 minutes after last key operation
Battery Life : Around 250 operations
Operating : 10˚C~40˚C (50˚F~104˚F)
Environment < 85% RH.
Storage Environment : -20˚C~50˚C (-4˚F~122˚F) < 85% RH
Weight : Approximately 150g (w / batteries)
Dimensions : 2.8" (L) x 2.9" (W) x 1.5"(H)
*Specifications are subject to change without notice.
Specifications
20

Lumiscope 1143 Specifications

General

Type	Automatic
Date imprinting	Yes
Number of users	1 user(s)
Memory registers	90
Placement supported	Wrist
Battery type	AAA
Number of batteries supported	2
Display type	LCD