Lumiscope 1143 User Manual

Memory Recall
15
To see the previously measured values
A. Press the “MEMORY” button to recall the last reading. The
LCD display will show the memory number, actual date
and time simultaneously of the measurement.
Memory Number
/
Date
B. To view additional readings, push the "MEMORY" button
successively to go through the various readings. (1~85).
Memory
Time
To insert the batteries
A. Lift the cover towards you to open the battery
compartment.
Note: Please remove batteries when not in use for an extended
period of time. Do not dispose batteries with household garbage.
Installing the Batteries
8
B. Insert 2 "AAA" batteries as indicated. Make sure to match
polarities (+, –) on the batteries.
C. Replace the battery cover by inserting the two hooks at
the bottom into the slot, then push on the top area.

Lumiscope 1143 Specifications

General

Type	Automatic
Date imprinting	Yes
Number of users	1 user(s)
Memory registers	90
Placement supported	Wrist
Battery type	AAA
Number of batteries supported	2
Display type	LCD