I-819A
®
Care & Cleaning
1. Avoid the use of automatic “brush-style” car washes.
2. Do not use cleaning solvents of any kind.
3. To wash, use only a mild soap and dry with a clean cloth or sponge.
4.
Do not pull on shield to close the hood.
If painting of the shield is desired:
CHECK FIT BEFORE PAINTING. LUND WILL NOT WARRANT PAINTING ON MISFITTING SHIELDS
1. Prep shield by cleaning with mild soap and water, rinse and dry thoroughly.
DO NOT USE ANY SOLVENTS TO PREP SHIELD!
2. Use only an Acrylic Based Enamel.
3. Apply several light coats of paint as opposed to one thick coat.
4. Let dry for 24 hours.
To Previous Page
Loading...
