Lund Interceptor User Manual

Grill mounting nuts
I-819A
Thank you for purchasing a LUND accessory; designed, engineered and built specifically for your vehicle. We have made
every effort to ensure that this hood deflector is top quality in terms of fit, durability, finish and ease of installation.
®
™
Package Contains: 1 Shield Tools Needed: 8mm (5/16”) socket and ratchet
Applications: Dodge Ram, Dodge Dakota
Installation Instructions
Please read carefully and completely before starting.
1. Clean hood of vehicle using hot soapy water, rinse
and dry thoroughly.
RAM: grill support mounts
2. RAM: Open hood and loosen the grill mounting nuts and
the grill support mounting screws. Allow 1/4” to 3/8” gap
between hood and grill.
DAKOTA: Open hood and remove the grill mounting nuts.
Allow 1/4” to 3/8” gap between hood and grill.
3. RAM, DAKOTA: Gently slide shield between hood and grill.
Make sure that the shield is centered left to right on the hood.
4. RAM: Tighten the grill mounting nuts and grill support mount
screws. (NOTE: adjustment of the grill support may be required
to ensure even spacing between the grill and fender. This
adjustment is required for proper fit of the Lund fender shields.)
DAKOTA: Reinstall and tighten grill mounting nuts.
5. RAM, DAKOTA: Inspect fit to make sure shield is aligned
properly with grill. Loosen grill mounts and adjust shield
placement if necessary.
RAM: adjust for even spacing
Proper Alignment

Lund Interceptor Specifications

General

Brand	Lund
Model	Interceptor
Category	Automobile Accessories
Language	English

Summary

Installation Instructions

Clean Hood

Prepare the vehicle's hood by cleaning it with soapy water, rinsing, and drying thoroughly.

Prepare Hood and Grill Gap

Loosen mounting hardware and create a gap between the hood and grill for shield placement.

Insert Hood Shield

Gently slide the hood shield between the hood and grill, ensuring it is centered.

Secure Hood Shield

Tighten mounting hardware for both RAM and Dakota models to secure the installed shield.

Final Alignment Check

Inspect the shield's alignment with the grill and adjust if necessary for a proper fit.

Care & Cleaning

General Care Guidelines

Avoid automatic car washes and solvents; use mild soap and water for washing.

Painting the Shield

Prep by cleaning, use acrylic-based enamel, apply light coats, and allow 24 hours drying time.