4-26
CDD3000-HF Operation Manual
4 Commissioning
Read from/write to SMARTCARD:
• In this menu CDD3000-HF settings can be saved to the S
MARTCARD
and transferred to other CDD3000-HF.
• In every storage operation all parameters are always saved to the
S
MARTCARD. For read operations, either all parameters or only
parameters for motor setup (per read operation) can be read-in.
Function Meaning
READ > ALL Read all parameters from SMARTCARD
READ > DRIVE
Parameters from subject area,
e.g. read-in motor settings
WRITE Store all parameters on the SMARTCARD
LOCK Write-protect the SMARTCARD
UNLOCK Cancel the write protection
To Next Page
Loading...