Lust CDD34.005-HF - Installation

CDD3000-HF Operation Manual
3-1
DE
EN
FR
IT
ES
FR
1
2
3
4
5
A
3 Installation
3.1 Overview ..................................................................3-2
3.2 Grounding lead connection .....................................3-4
3.3 Motor connection ....................................................3-5
3.3.1 Motor phase connection .......................................3-6
3.3.2 Motor temperature monitoring .............................3-7
3.3.3 Holding brake (if installed) ....................................3-8
3.3.4 production of encoder cables ...............................3-8
3.4 Mains connection ..................................................3-13
3.5 Braking resistor (RB) ............................................3-16
3.6 Control connections ..............................................3-17
3.6.1 Specification of control connections ...................3-18
3.6.2 Standard terminal assignment ...........................3-20
3.6.3 Isolation .............................................................3-21
3.7 EMC compliant installation ...................................3-22
3.8 Encoder simulation - Master encoder input ........3-23
3.8.1 Encoder simulation ............................................3-23
3.8.2 Master encoder ..................................................3-25
Attention: Installation must only be carried out by qualified electricians
who have undergone instruction in the necessary accident
prevention measures.