Lust CDD34.005-HF - Operation with Keypad KP200

4-24
CDD3000-HF Operation Manual
4 Commissioning
4.6 Operation with
K
EYPAD KP200
The KEYPAD can be plugged directly into slot X4 of the CDD3000-HF.
K
EYPAD KP200 overview
Menu structure The KEYPAD KP200 offers a user-friendly menu structure, shown below.
Figure 4.2 Functions of the menus
(1)
Chipcard (S
MARTCARD) to back-up and
transfer settings
(2)
3-digit display, e.g. for parameter
number
(3) Current menu
(4)
5-digit display for parameter name and
value
(5) Acceleration or braking ramp active
(6) Bar graph display, 10-digit
Call up menu branches or parameters; save changes;
start in “Control drive” mode
Quit menu branches; cancel changes; stop in “Control drive” mode
Select menu, subject area or parameter; increase setting
Select menu, subject area or parameter; reduce setting
Figure 4.1 Controls and displays on the KEYPAD KP200
SMART C A R D
SMARTCARD
SC-XL
start
enter
stop
return
VAL
Hz
(2)
(1)
(6)
(4)
(3)
(5)
start
enter
stop
return
Actuals
• Select
•Display
Capacity indicator
Subject area
•Select
Parameters
•Select
• Change
Initial
commissioning
Drive
• Control
READ FROM/WRITE TO
S
MARTCARD
•Read
•Write
•Write
protection
VAL
PARA
CTRL
CARD