7 -2 Symbols & units of display
Symbol & Function
Unit
V/m Electric field strength
W/m^2 Power density
mW/cm^2 Power density
Normal, Frequency team indicates.
2.45 GHz
PEAK HOLD Appears on the " PEAK HOLD " function.
It will latch the peak value.
REC Appears on the " REC " function, it will
record maximum and minimum value.
HOLD Appears on the " HOLD " function, it
will freeze the present reading.
Alarm setting Appear on the " Alarm setting Low
low limit limit " function.
Alarm setting Appears on the "Alarm setting High
High limit limit" function.
Alarm setting Appears on the "Alarm setting hysteresis "
hysteresis function.
Flash unit on Appears on the " START " function, it
the display indicate the ALARM FUNCTION has
starting.
9
To Next Page
Loading...
Need help?
General
