Lutron Electronics Grafik Eye GRX-4000 Series - Control Unit Configuration; Step 5: Set Address Switches

10
Control 1
Control 2
Control 3
Control 4
Control 5
Control 6
Control 7
Control 8
Control 9
Control 10
Control 11
Control 12
Control 13
Control 14
Control 15
Control 16
Action
No switches for addressing.
LUTRON
LUTRON
LUTRON
LUTRON
LUTRON
SEQUENCE
ZONE LOCK
SCENE LOCK
FADE OVERRIDE
4
3
2
1
1 2 3 4 5 6
The address of a Control Unit
is set later in this guide.
STEP 5: Set Address Switches
Control
GRX-IT NTGRX-1S GRX-4000
GRX-PRG
Function
N/A
Setting Switch 1-8 requires
knowledge of intended function.
Setting Switch 5,6,7, or 8 requires
knowledge of intended function.
LUTRON
1 2 3 4
1 2 3 4 5 6
1 2 3 4 5 6
Caution! Do not install controls in wallbox without
setting the Address and Function Switches.
Back of
Wallstation
Switch
location
GRX-AV
For More Information . . .
See One-Line Diagram from submittals.
See Installer's Video GRX-V-INST available from Lutron.
?
LUTRON
R
Set Address Switches
Up
(On)
Down
(Off)
LUTRON
1
2345
6
78
Address
ALL
OTHERS
Control 16
Must set switches BEFORE
installing these controls.
Set Switches 1-4 on each
Wallstation and Interface Control
to a unique address.
Automatically assigned.