2) With the REC symbol on the display :
(a) Press the " REC Button " ( 3-3, Fig. 1 ) once and the
" Max " symbol along with the maximum value will appear on
the display.
(b) Press the " REC Button " again, the " Min " symbol
along with the minimum value will appear on the display.
(c) To exit the memory record function, press the " REC
Button " continuously for at least 2 seconds. The display will
revert to the current reading.
(d) Clear the Max./Min. value recorded by pressing the
" Hold Button " ( 3-2, Fig. 1 ) once. Previous recorded
Max./Min. value will be given up and then revert to the
REC. function keep on recording.
5-3 Auto Power Off Disable
In order to prolong the battery life, the instrument has "Auto
Power Off " function. The meter will switch off automatically if
no buttons are pressed for around 10 minutes.
6. BATTERY REPLACEMENT
1)
to replace the battery. However measurement may still be
made for several hours after the low battery indicator appears.
2) Open the " Battery Compartment / Cover " ( 3-12, Fig. 1) and
remove the battery.
3) Install a 9V battery (Alkaline or Heavy duty type) and then
reinstate the cover.
10
To Next Page
Loading...
Need help?
General
