Lutron Electronics QSE-IO - User Manual

R
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
QS System QSE-IO Control Interface
369374a 1 08.07.12
QSE-IO Control Interface
The QSE-IO contact closure interface provides
integration with third-party equipment requiring
contact closure input/output, including occupancy
and vacancy sensors; motorized projection screens,
skylights, and window shades; AV equipment; security
systems; movable partition walls; and timeclocks. One
QSE-IO interface provides five (5) dry contact closure
outputs.
For complete functionality, programming
instructions, and detailed DIP switch settings, see
the QSE-IO Programming Guide, PN 040391,
at www.lutron.com/qs.
Key Features
•IntegratesaGRAFIKEye
® QS control system
with equipment that has contact-closure I/O
•Providesveinputsandvedrycontactclosure
outputs.
•Providesbothnormallyopen(NO)andnormallyclosed
(NC)contacts.
•Maybeprogrammedtocontrolorbecontrolledby
anycombinationofGRAFIKEye
® QS control units or
control any combination of Sivoia
® QS window
treatments on the QS link.
Compatible Components
The following devices are compatible with the QS link.
Formoreinformationoneach,referto
www.lutron.com/qs.
•GRAFIKEye
® QS control units
•seeTouch
® QS wallstations
•Sivoia
® QS shades
•QSInterfaces(contactclosure,Ethernet/RS232)
•Quantum
® system
•EnergiSavrNode
TM units
•QSSensorModule
•QSKeyswitch
For Programming, see the
QSE-IO Control Interface Programming Guide:
PN 040391 at www.lutron.com/qs
Requirements
•QSLinkPowerSupply,suchasa:
 -GRAFIKEye
® QS
 -QSLinkpowersupply,suchastheQSPS-P1-1-50
 -EnergiSavrNode
TM QS
- Quantum
® light management hub
•QSCommunicationLink(IECPELV/NEC
®Class2)
(seeQSLinkWireSizestable)

Lutron Electronics QSE-IO Specifications

General

Brand	Lutron Electronics
Model	QSE-IO
Category	Control Unit
Language	English