Lutron Electronics QSGR-TC-3S-WH - User Manual

QS Timeclock
(for lights and window treatments/shades)
Installation and
Operation Guide
Please Read
The QS Timeclock is a premier energy-saving astronomic timeclock for lights
and window treatments, which integrates seamlessly with the Lutron Energi
Savr Node components and QS window treatments.
Model Number: QSGR-TC-3S-WH
Rating: 120 –240 V~ 50 / 60 Hz 100 mA
Output: 24 V- 150 mA IEC PELV/NEC® Class 2 supply
English
®
Français Español Português Deutsch Italiano Nederlands 中文
Contents
Features and Functions ..................2
Line Voltage Wiring .....................3
Terminations ..........................3
Line Voltage Wiring Details ...............4
Overview of IEC PELV/NEC® Class 2 Wiring ..5
QS Link Wiring ........................6
Completing Installation ..................8
Programming Mode ....................9
Associating QS Window Treatments .......10
Adjusting Window Treatment Settings .....10
Contact Closure Input (CCI) Setup ........13
Timeclock Operation
Setting Time and Date .................14
Setting Location .....................15
Setting Daylight Saving Time ...........15
Adding an Event .....................16
Deleting / Viewing an Event .............17
Setting / Viewing / Deleting a Holiday ......18
Copying / Deleting a Schedule ...........19
Afterhours ...........................20
Diagnostics ..........................21
Setting the Security Password ...........21
Language Selection ....................22
Faceplate Removal ....................22
Troubleshooting .......................23
Warranty, Contact Information ...........24

Lutron Electronics QSGR-TC-3S-WH Specifications

General

Manufacturer	Lutron Electronics
Model Number	QSGR-TC-3S-WH
Category	Control Unit
Color	White
Number of Buttons	3
Mounting Type	Wall Mount
Voltage	120V
Maximum Load (Incandescent)	600W
Maximum Load (Magnetic Low Voltage)	600W
Frequency	60Hz
Load Type	Incandescent, Electronic Low Voltage, Magnetic Low Voltage

Summary

Line Voltage Wiring

Completing Installation

Programming Mode

Associating QS Window Treatments

Adjusting Window Treatment Settings

Contact Closure Input (CCI) Setup

Timeclock Operation

Setting Time and Date

Procedures for setting the current time and date on the QS Timeclock, including format selection.

Setting Location

Instructions for configuring the geographical location for accurate timekeeping and astronomical events.

Setting Daylight Saving Time

Adding an Event

Steps to create new scheduled events for scenes, window treatments, or afterhours.

Deleting an Event

Afterhours

Diagnostics

Setting the Security Password

Language Selection

Troubleshooting