Lutron Electronics YK-2001PHA - Page 32

1) Unscrew the " Probe head " ( 9-3, Fig 6 ).
2) Pour out the old Electrolyte from the
container of the " Probe head ".
3) Fill the new Electrolyte ( OXEL-03 )
into the container of the " Probe
head " .
4) Screw the " Probe head " ( 9-3, Fig 6 )
into the probe body.
5)
When not use the
probe, should insert
the " Probe head "
into the " Probe
protection cover "
9-1 Probe handle
( 8-5, Fig. 5 )
9-2 Temp. sensing metal
9-3 Probe head
30