Lutron Electronics YK-2001PHA - LCD Backlight ON;OFF; Advanced Setting

9-3 LCD Backlight ON/OFF
After power ON, the " LCD Backlight " will light
automatically. During the measurement, press the
" Backlight Button " ( 3-2, Fig. 1 ) once will turn OFF the
" LCD Backlight ".
Press the " Backlight Button " once again will turn ON the
" LCD Backlight " again.
10. ADVANCED SETTING
press the " SET Button " ( 3-7, Fig. 1 ) continuously at
least two seconds will enter the " Advanced Setting " mode.
then press the " SET Button " ( 3-7, Fig. 1 ) once a while
in sequence to select the eight main function, the
display will show :
PoFF.......
Auto power OFF management
bEEP........
Set beeper sound ON/OFF
t-CF.......
Select the Temp. unit to ℃ or ℉
SALt........
Set DO salt% compensation, DO only
High-......
Set DO height (meter) compensation, DO only
Highf......
Set DO height (feet) compensation, DO only
PEr C......
Set CD temperature compensation factor, CD only
t-SEt........
Set pH manual Temp. compensation value, pH only
ESC......
Escape from the advanced setting
Remark :
a. DO - Dissolved oxygen Mode
CD - Conductivity/TDS Mode
pH - pH/mV Mode
b. During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-3, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
32