Lutron Electronics YK-2001PHA - Page 35

10-1 Auto power OFF management
When the lower display show " PoFF "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2) After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
10-2 Set beeper sound ON/OFF
When the lower display show " bEEP "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
is power ON.
2) After select the upper text to " yES " or " no ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.
33