Lutron Electronics YK-2001PHA - PH Electrode; Accessories; Pe-03, Pe-11, Pe-01, Pe06 Hd; Pe-04 Hd, Pe-05 T, Pe-03 K7

Temperature Manual 0 to 100 ℃, be adjusted by
Compensation push button on front panel.
for pH
Automatic
With the optional temperature
measurement ( ATC ) probe ( TP-07 )
0 to 65 ℃.
pH PH7, PH4, and PH10, 3 points calibration
Calibration ensure the best linearity and accuracy.
Optional *
PH electrode.......................
PE-03, PE-11, PE-01, PE06HD
probe and
PE-04HD, PE-05T, PE-03K7
accessories * ATC ( automatic temperature
probe )....................................... TP-07
* pH 7 buffer solution.....................
PH-07
* pH 4 buffer solution......................
PH-04
* ORP electrode.............................. ORP-14
Measurement Range Resolution Accuracy
PH 0 to 14 PH 0.01 PH ±(0.02 PH + 2 d)
mV
-1999 to 1999 mV 1 mV
±(0.5% + 2 d)
* PH accuracy is based on calibrated meter only.
B. Conductivity
Conductivity probe Optional, Carbon rod electrode for long life.
Function * Conductivity ( uS, mS )
* TDS ( Total Dissolved Solids, PPM )
* Temperature ( ℃,℉)
Temperature
Automatic from 0 to 60 ℃ (32 - 140 ℉),
Compensation with temperature compensation factor
variable between 0 to 5.0% per C.
Probe 0 to 60 ℃.
Operating Temp.
Probe Dimension Round, 22 mm Dia. x 120 mm length.
Optional *
Conductivity probe......................................
CDPB-03
probe and *
Pt Conductivity probe......................................
CDPB-04
accessories * 1.413 mS Conductivity Standard
Solution...........................................
CD-14
6