13
LUVION Premium Baby products
4.2 Getting started - Connecting Devices
How does it work?
When a user tries to access the Camera, our server authenticates the user’s identity and permits
access to the Camera.
4.3 Setup
Connect the Wi-Fi® Camera to the Power Adaptor, then plug into mains power. The Camera must
be within range of the Wi-Fi® router with which you want to connect. Make sure the password of
the router is available for entering during the in-app setup process.
Status of LED Indication:
• Pair / Setup state: LED is Flashing Green.
• Unconnected state: LED is Flashing Red.
• Connected state: LED is Solid Green.
Note:
You can only setup via a compatible smartphone or tablet only.
4.4 User Account and Camera Setup on Android™ Devices or iPhone®/iPad®
What you need
• Wi-Fi® Camera Unit
• Power adaptor for the Camera
• Device with Android™ system version 8.0 and above
• Or iPhone®/iPad® with iOS version 12.0 and above
4.4.1 Power ON and Connect the Camera
• Switch the parent unit off before connect the camera to Wi-Fi®.
• Connect the power adaptor to mains power and insert the plug into the power socket on the
back of the Camera Unit, the unit turns on.
Access your
Camera locally
View your Camera from any
compatible device remotely
Wi-Fi RouterWi-Fi®
Camera
Server
To Next Page
Loading...
