Luvion ESSENTIAL CONNECT - Wi-Fi Internet Viewing

12
3.13 Delete a Baby Unit
You can choose to remove a paired Baby Unit from the Parent Unit.
1. Press when the Parent Unit is in camera viewing mode.
2. Press
or to scroll to .
3. Press or to select the desired Baby Unit (Cam1, 2, 3 or 4).
4. Press button, then or to choose YES ( ) or NO (X).
5. Press button to confirm your selection.
Note:
You cannot delete a Baby Unit if it is the only one paired.
3.14 Multi-Camera Use
Up to 4 cameras can be paired with the Parent Unit, and if more than one camera is linked to the
Parent Unit, you can select which camera to view or set it in Patrol mode , where the Parent
Unit automatically steps through the paired cameras about every 15 seconds.
Note:
The audio from a camera is only heard at the Parent Unit when that camera is selected.
To change the camera being viewed:
1. Press button when the Parent Unit is in camera viewing mode to step through the paired
cameras, 1, 2, 3, 4, , with the selected option shown on the screen.
4. WIFI® INTERNET VIEWING
4.1 Minimum System Requirements
Android™ System
• Version 8.0 or above
iPhone®/iPad® iOS
• Version 12.0 or above
High Speed (Wi-Fi®) Internet
• At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this
site: http://www.speedtest.net)