If you encounter a problem, please review the items in amp, speakers, turntable, CD player. TV, cassette
the following checklist. Also, be sure to thoroughly
deck. equalizer, etc.
check other connected components, such as power
Check AC power cord to ensure good connection at AC outlet.
PROBLEM
-
--
--
No sound
PROBABLE CAUSE AND SOLUTION
-.
-
-. .
--
.
-
-
-
-
-
-
I
I
lncorrect input selected. Check input leads on rear panel (be sure they
match input selected).
Line inputs and outputs of a connected tape deck are reversed.
,
SIGNAL PROCESSOR OUTilN jumper bars are removed. Replace.
"VOLUME" control (item
#6)
is set at its minimum position.
I
No record signal.
*
Incorrect settings of "REC OUT SELECTORq' (item #I
5).
..
.
--
-
-
-
~.
I
Remote inoperative
1
Check "AA" batteries. See page1
5.
/
Reset unit. Unplug power cord for
15
seconds. Then replug.
To Next Page
Loading...
Need help?
General
