Luxman CL-1000 - Rear Panel Terminals Overview

7
VACUUM TUBE CONTROL AMPLIFIER CL-1000
1. Cartridge selection switch
(PHONO CARTRIDGE)
Selects MM, MC, impedance, or gain in accordance with
the cartridge to be used.
Conduct setting in accordance with the specifications of the
cartridge or your favorite.
Cartridge
selection
MM MC-H MC-M MC-L
Impedance
100 kΩ/
50 kΩ /33 kΩ
1 kΩ 40 Ω 10 Ω
Gain 38 dB 57 dB 57 dB 66 dB
2. Input capacitor selection switch
(PHONO CAPACITY)
Selects an input capacitor in accordance with the cartridge
to be used.
Conduct setting in accordance with the specifications of the
cartridge or your favorite.
Selectable capacitors are the following: 0 pF/47 pF/100pF/
147 pF/220 pF /320 pF
3. Unbalanced input terminals/INPUTS
(LINE-1, LINE-2, LINE-3)
Coaxial input terminal to receive unbalanced audio signals
of a line level
Connect these terminals to an unbalanced output of an
input device such as a CD player with a pin-plug cable.
Incoming audio signals are selected with the input selector
and delivered.
4. EXT-IN (PHONO) terminal
Is an input terminal to connect an analog record player.
Do not connect a CD player or other devices whose output
level is high to this terminal.
Normal playback cannot be achieved due to sound crack.
5. Balanced input terminals/INPUTS
(BAL LINE)
This terminal is an XLR connector input terminal to receive
balanced audio signals of the line level.
Connect these terminals to a balanced output of an input
device such as a CD player with a balanced cable.
Incoming audio signals are selected with the input selector
and delivered.
Rear panel
31 2 4 6 75
9 8