Rear panel
1. Signal ground (ground terminal) (SIGNAL
GROUND)
Is a ground terminal for devices to be connected
to this unit. This terminal is used to reduce noise
when other devices are connected. This terminal is
designed not for safety.
2. Phono input terminal (PHONO)
Is an input terminal to connect an analog record player.
Do not connect a CD player or other devices whose
output level is high.
Norm
al playback cannot be achieved due to sound crack.
3. LINE-1, LINE-2, LINE-3, and LINE-4 input
terminals (unbalance)
(LINE-1, LINE-2, LINE-3, LINE-4)
Are used for high-level signal inputs from a CD
player, an SACD player, a tuner, a DVD player, a TV,
and other such devices. The input sensitivity is 180
m
V,
and the impedance is 47 kohms. These input
terminals offer the same functions.
4. Recorder input/output terminals (REC)
Connect the audio input/output of a recorder. The
audio input of a recorder is connected to REC OUT,
and the audio output of a recorder is connected to
MONITOR.
Do not insert shortpin plugs into REC OUT
.
No sound is generated.
Names and Functions
To Next Page
Loading...
