39
④ Repetitive measurement
- Measure repeatedly according to need.
- The latest measurement value is indicated every time measurement takes place.
- Up to 10 measurement frequencies (excluding measurement failure) are indicated for each of the
eyes on the left and right.
It is possible to see up to the 10 latest measurement values on the DISPLAY mode’s screen.
⑤ Measurement of the opposite eyes.
- Measures the left eyes while pushing the stage to the right side while holding the operation lever.
- PD value (distance between pupils, Pupillary Distance) gets indicated on the monitor when the left
and right eyes are measured.
Distance between pupils
[Screen indicating distance between pupils]
⑥ Printing
- Print measurement result by pressing on the print button.
- Contents selected from the user Setup mode get printed. (Refer to “9.5. User Setup mode” part)
- Cut out the printing page.
- Input patient’s name in the name space according to need.
To Next Page
Loading...
Need help?
General