luxvision LRK-7000 - Page 61

61
: Select data transmission speed with another device (9600, 57600, 115200bps)
- RS232 PROTOCOL (COM1) (Off/V1/V2/Ext.)
: Setting up the transmission method (other equipment method and Version)
- MODE (COM1) (Std/Avg/Misc)
: Data format setting for transmission method.
- LM PRINT (Off/On): Sets whether to print the data imported from the connected Lensmeter (US
Ophthalmic LLC LM-1) using the built-in printer of the device. When “On” is selected, the data is
printed from the device printer by pressing the print button of the lensmeter.
- BPS (COM2) (9600/57600/115200)
: Select data transmission speed with other device (9600, 57600, 115200bps)
- RS232 PROTOCOL (COM2) (Off/On)
: Set on if your system use second communication port.
(To use second port, RS232 Y CABLE must be connected to your device.)
- MODE (COM2) (Mate/LM)
: Select the target of second communication port.
! NOTE
- For the users who want LRK-7000 is connected with two devices at the same time, we
prepare the RS232 Y CABLE.
- If LRK-7000 is connected with only one device, set [RS232 PROTOCOL (COM2)] off, and
do not care about all of “COM2” options.
- LRK-7000 has only single serial port but, with the RS232 Y CABLE, you can connect two
devices to it. Followings are available connections.