65
8. ETC (other setting)
- LANGUAGE (English/Chinese): Selects the language that is indicated on the screen and printer
output door.
- BEEP SOUND VOLUME (Off/Low/Mid/High): Sets up the Beep sound output to small, average
and large.
- INITIAL MODE (REF/KER/K&R): selection of initial measurement mode.
- SLEEP MODE (Off/3min/5min/10min): Sets up the time required for entering into the power-
saving mode
- AIMMING DOT (Off/On): The center position of the patient's eye is indicated by a yellow dot.
- DELETE CONFIRM DIALOG (Off/On): The confirmation dialog box is displayed by pressing
the delete button of the measurement screen.
To Next Page
Loading...