LX Era
Release notes
Document name: LX EUM
Document revision: R1
• New and improved icons
10.18 0.9j (2018-02-05)
• General code improvements
10.19 0.9i (2018-02-02)
• Fixes to Altitude graph
10.20 0.9h (2017-12-19)
• AHRS is working correctly
• APT and TP are selected correctly on Eos80.
• Name of TP in task edit is shown correctly also for long names.
• Sn is displayed correctly on Eos80
• AHRS page will show red X when AHRS module is not connected to CAN or when AHRS
is disabled.
• Empty navbox value is now correct.
• on GPS bad all navigation pages have red X across the screen.
• audio test is working.
• added vario silence range.
• added max SC speed.
• load task option enabled.
• battery symbol is showing correctly backup battery status.
• 2.5m/s vario scale on Era is working correctly.
• sort setting for TP and APT is now saved. By default, distance is selected.
• TP names are visible on navigation pages and also TP/APT icon is shown as dot or icon
depending on numbers of it displayed.
• dimming option added on quick menu.
• altitude graph on statistic page has Y-axis labelled.
• view zone under task edit menu is implemented.
• airspace warnings can be disabled under Warnings menu.
• Flarm NET list is supported and Flarm object info is shown under Flarm options.
• callsign is shown on radar screen if exists in Flarm NET database.
10.21 0.9f
• 2nd seat Era will work correctly in Zeus configuration.
• automatic switch to TA page is supported on Era and Eos80 projects.
• TA options menu added to set auto TA, maxBeep, beep offset and MC coloring. Navbox
are as default and cannot be changed jet.
• shortcut Task and Setup from Joy are now supported.
• sort by distance, Name and code / ICAO supported for TP and APT.
• added exit on the end of task edit option.
• AHRS page activated.
• Speeds below 0 are not shown any more on speed type on TA and G-force page (LX Era).
Device manual Public 92
To Next Page
Loading...
Need help?
General
