LX Era
Release notes
Document name: LX EUM
Document revision: R1
• select filter for TP, APT on task edit is working correctly.
• weight is changed to mass.
• overlapping of text and icon on TP select or task edit is corrected now.
• back character is shown correctly and simulator doesn’t crash any more on erase char-
acter.
• G-force background picture is now more visible.
• G-force menu is working on Eos80.
• There is no zoom visible in Task TP / APT selection dialogue.
• Joy up/down are working on vario, TA, logbook, setup page to change volume.
10.22 0.9d
• Added track line on task page.
• SD card stability when working with internal and external is now correct.
• wind speed can be selected as m/s unit.
• event interval is fixed at 1s.
• event records can be set from 30 to 60.
• when changing vario units on Era, vario scale will not oscillate anymore.
• if units ft are chosen, initial elevation is working correctly.
• altitude (ft) has now label ALT and units ft (before was label QHN and no units).
• ranges on G-force page are working correctly (they change with press on the button).
• init setup and QNH change is working correctly when pressure is set to inHg. (closes
1481)
• MC range is corrected when kts are used (up to 10kts).
• wind will be shown correctly in Zeus configuration.
10.23 0.9b/c
• Shoutdown option will count 3s before turning off.
• Flarm warning screen implemented with beep and voice announcement.
• Event info dialog shown on external input or enter on GPS info page.
• Info pop up dialog integrated.
• Polar is shown correctly on polar select menu.
• Thermal assistant is showing correctly for both direction of circling.
• 10s press on enter button will reset device.
• AS warning with visual display, audio beep and voice announcement.
• Declaration over BT is working.
• Declaration over User port to Oudie / XC is supported now.
• Flarm and BT icon are working on status bar.
• FL is displayed correctly.
• Altitude in ft is displayed correctly when units Ft is set.
• Device will show warnings for Stall, Vne, Gear, Airbrakes, Altitude with voice announce-
ment.
• All dialogues under transfer have ”deselect” option to deselect active TP, APT, AS file.
• On new file select, loading progress dialogue will be shown until all new database is
loaded.
Device manual Public 93
To Next Page
Loading...
Need help?
General
