Lynx 2000 Forest Fox Syncro - Page 167

27
OPERATORS MANUAL
ELECTRONIC REVERSE (RER)
Touring 500 F, Ranger 2000
These models are equipped with an electronic reverse controlled
by a reverse button. Driving in reverse is achieved by changing
the direction of engine rotation. Shifting in reverse is an electronic
operation consisting of a control module that modifies the ignition
timing of the engine.
When depressing the reverse button, a signal will slow down
the engine RPM enough to modify the ignition timing advance.
This reverses cranckshaft rotation.
No mechanical action and gear change is involved.
No adjustment is needed.
Shifting Procedure
With the snowmobile completely stopped and engine running at
the idle, press and release the electronic reverse button.
A03E1QA
1
1. Reverse button