EasyManua.ls Logo

Lynx 2000 Forest Fox Syncro - After Driving Procedures

Lynx 2000 Forest Fox Syncro
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
OPERATORS MANUAL
AFTER DRIVING
· Clean the snowmobile and the tracks from snow and ice.
· Check that the draining holes under the engine, the exhaust
pipe and under the gearbox are open.
· Open the engine cover and remove the snow, if any, in the
engine room. When it is cold, the heat of the engine is not
enough for melting the snow, but the snow forms into ice
and may hampere the steering on the following day.
· Check the tension of the track, and if the snowmobile is
standing for a longer time, lift it up at the rear and fill the fuel
tank.

Table of Contents

Related product manuals