EasyManuals Logo

Lynx Forest Fox Syncro User Manual

Lynx Forest Fox Syncro
Go to English
183 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
OPERATORS MANUAL ____________________________________ 19
ENGLISH
GEAR SHIFTING WITH SYNCRO GEAR BOX
Select the shift taking into consideration your driving; the 1st gear gives the greatest
pulling capacity; the 2nd gear gives the highest speed. The gear positions you see
in the below. By the gear lever there is a tape indicating the gear positions. When
shifting gears from 1
st
to 2
nd
the speed limit is max 15 km/h. In order to shift from 2
nd
to 1
st
you have to stop the snowmobile.
Gearbox have no chain.
Chaindriven models have no gearbox, but you can buy as an extra equipment the
reverse gear. Snowmobile is capable of a fast reverse.
Driver should become familiar with this operation by practising on level ground.
Ensure the path behind is clear of obstacles or bystanders.
Note that skis or front suspension may be damaged if the ski bumps an obstacle,
also the driver may be damaged.
Fast reverse, while turning, could result in lost of stability.
GEAR SHIFTING (CHAINCASE DRIVE CHAIN)
Driver should become familiar with this operation by practising on level surface.
Ensure the path behind is clear of obstacles or bystanders.
Note that skis or front suspension may be damaged if the ski bumps an obstacle,
also the driver may be damaged.
Fast reverse, while turning, could result in lost of stability.
WARNING !
When shifting to reverse/from reverse snowmobile has to be stopped.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lynx Forest Fox Syncro and is the answer not in the manual?

Lynx Forest Fox Syncro Specifications

General IconGeneral
BrandLynx
ModelForest Fox Syncro
CategorySnowmobiles
LanguageEnglish

Related product manuals