42 _____________________________________________ OPERATORS MANUAL
ENGLISH
Adjustment
On some models, remove wheel cap.
Loosen the rear idler wheel retaining screws.
Turn adjustment screws to adjust. If correct tension is unattainable, contact an
authorized dealer.
Recheck track tension once more.
NOTE: Excessive tension causes loss of power and stresses various suspension parts.
WARNING!
Never put your hands into the rotating track.
1. Adjustment screw
2. Loosen screw
Remove wheel cap (some models)
Alignment
NOTE: Track tension and alignment are inter-related. Do not adjust one without the other.
To Next Page
Loading...