Lynx Forest Fox Syncro - Page 177

OPERATORS MANUAL ____________________________________ 57
ENGLISH
Lubrication and maintenance chart
S
ome items may not apply to your particular model. For more detailed service information you get from service shop.
1
First service 250-500 km., to be performed
by authorized service shop
2
Weekly or every 250 km, user/owner
3 Monthly or every 1000 km, user/owner
4
Once a year or every 3000, to be performed
by authorized service shop
5
S
torage/Summer storage, according to special instructions, to be performed
by authorized service shop
6
Pre-season preparation, according to special instructions, to be performed by authorized service shop
123456
ENGINE AND
S
tarting rope condition xx
COOLING
E
ngine mount nuts x x
SYSTEM
E
xhaust system x x x
Cleaning of RAVE-valves x x
E
ngine lubrication x
Cooling system condition (coolant level/fan belt) x x
Cooling hoses and connections x x x
Coolant replacement(replaced every year) x
Condition of seals x
OIL INJECTION
I
njection oil filter condition x
I
njection oil filter replacement (replaced every year) x
Oil injection pump adjustment, wire condition x x
FUEL
Fuel stabilizer
x
SYSTEM
Cleaning of fuel filter(fuel tank) x x
Fuel filter replacement(replaced every year) x
Fuel lines and connections x x
CARBURETOR
Carburetor adjustment (control of syncronising) x x
Carburetor cleaning x
I
nspection of throttle cable x x x
I
nspection of rubber flanges x x x
Air filter cleaning xx
TRANSMISSION
Drive belt condition x x
Condition of drive and driven pulleys x
Adjustment of drive and driven pulleys x x
Cleaning of drive and driven pulleys x x
Retorquing of drive pulley screw x
Driven pulley preload x x
L
ubrication of driven pulley axle with anti-seize lubricant x
I
nspect Cam Arm (Comet) and replace if neeeded x